Buyer FAQ
Bag fabric sourcing questions.
Review the selection, sampling and production questions buyers ask most often.
How do I select denier and construction for a backpack fabric?
Start with the bag type, load, abrasion zones, reinforcement areas, desired hand feel and finished-product weight. Brilliant-Tex works across a broad denier range, from 15D to 2520D, but the correct construction must be confirmed from the intended use rather than selected by denier alone.
Can backpack fabric be made water repellent, coated or laminated?
Yes. Available finishing routes include water repellency, coating and lamination, as well as antistatic, flame-retardant, UV-cut and anti-infrared options. Confirm whether the fabric will be printed or heat decorated: DWR can reduce print adhesion, and laminated fabric printing should be kept below 120 C.
What tests are relevant for high-wear bag panels?
For the agreed construction, the in-house route can include tear strength, tensile strength, fabric weight, water repellency and water resistance. Colour fastness can be checked at the factory. Define the panel use and customer test method first so the test report matches the real bag application.
How should I handle colour and hand-feel approval?
Approve a lab dip and physical reference before bulk production. Production conditions can vary slightly, so hand feel can be matched closely but not guaranteed identical between lots. If colour correction is required during production, it may affect some physical properties; set priorities and tolerances in advance.
What are the normal MOQ and sample terms for woven backpack fabric?
For nylon and polyester woven fabric, stated bulk MOQ is normally 1,000 m per colour or pattern and 3,000 m per export order. With appropriate grey cloth available, sample MOQ is normally 100 m per colour. Smaller quantities may be possible with a small-lot surcharge.
Can rolls be supplied at an exact fixed length?
Exact roll length cannot be guaranteed for every roll because processing can create unavoidable loss. A specified proportion of rolls can be packed to a target length after the fabric and process are known. Agree the acceptable roll-length mix before production.
Can Brilliant-Tex support custom technical fabric development?
Yes. Share the end use, target market, required function and estimated volume. The team can recommend an existing construction or discuss a tailored development route.
Which performance information should we provide for a quotation?
Include required weight, construction, finish, target test method, wash requirement, expected delivery timing and estimated quantity where available.
How is production quality supported?
The project route can include laboratory testing, production coordination, on-site checks and lot-level review according to the agreed scope.
Can you provide technical documentation?
Available documentation depends on the selected construction, agreed test scope and project stage. Request the relevant specification and quality information from the project team.
